Bioenergetic considerations in the improvement of oil content and quality in oil-seed crops

Summary Production values (PVs), defined as the weight of the end product/weight of the substrate required for carbon skeletons and energy production, were calculated for plant fatty acids. The PVs varied from 0.361 to 0.300 with linolenic acid having the lowest value. In general, the PVs of unsaturated fatty acids were lower than those of saturated fatty acids of similar chain lengths. Using this basic information, PVs of (A) oils from different oilseed crops, based on their standard fatty acid composition and (B) seed biomass with specified oil content and fatty acid composition were calculated. 1/PV gives the glucose required for the biosynthesis of 1 g end product and thus an estimate of the photosynthate requirement for the desired breeding goal can be estimated. Such calculations show that increasing oil percentage in seeds has a maximum energy cost when the increase in oil is associated with a decrease in the amount of carbohydrates where there is no change in protein concentration. Reduction of erucic acid content in the rapeseed oil did not alter its PV. It is inferred that there are no serious bioenergetic constraints in altering the fatty acid composition.     

Chemical composition of fresh and composted urban waste

Chemical, spectroscopic (IR and NMR), and molecular characteristics of humus extracted from urban waste before and after compositing are reported. The main differences are in the contents of acidic groups and straight aliphatic chains which diminish in the composted material. In comparing humus characteristics of composted urban waste and soils, the only real difference was found in the elution curves on Sephadex G-100, where the ratio of 100,000 and 1,300 peaks was higher in the compost than in the soil curve. The finding suggests that this ratio is a parameter that could enable us, even if in a semiquantitative manner, to follow the humification process of the compost when its addition to the soil is not less than the autochthonous organic matter content.Research work supported by CNR, Italy, Special grant I.P.R.A.-Sub-project 1. Paper N. 1531.     

Evaluation of oil dispersion formulation of nematophagus fungus,Pochonia chlamydosporia against root-knot nematode,Meloidogyne incognita in cucumber

Root-knot nematode, Meloidogyne incognita is considered as one of the major non-insect pests of crops. The management of these root feeders becomes highly challenging due to a strong host-parasitic relationship. Pochonia chlamydosporia is a nematophagus fungus that colonizes eggs of nematodes. This study aimed to test the efficacy of P. chlamydosporia (NAIMCC-SF0039) against M. incognita. An oil dispersion formulation of P. chlamydosporia was prepared using emulsifiers and vegetable oil. This formulation had a shelf-life of 90 days (3.3 × 10⁸ CFU/mL) at room temperature (28 ± 1 °C). The inhibitory effect of oil formulation was tested against M. incognita by inoculating it on the egg mass. We found that colonization of the gelatinous matrix occurred on the third day of inoculation followed by complete egg parasitization on the seventh day. A greenhouse trial was laid out to evaluate the biocontrol potential of P. chlamydosporia in cucumber (Cucumis sativus). The results showed that the application of talc formulation of P. chlamydosporia at the rate of 1 kg per acre during planting, followed by delivery of 1 L of oil dispersion formulation through drip lines at 30-day intervals caused the highest reduction of nematode infestation. This treatment recorded 67.9 and 57.5% reduction in egg masses and soil nematode population respectively than that of control.     

Genetic basis of kernel nutritional traits during maize domestication and improvement

The nutritional traits of maize kernels are important for human and animal nutrition, and these traits have undergone selection to meet the diverse nutritional needs of humans. However, our knowledge of the genetic basis of selecting for kernel nutritional traits is limited. Here, we identified both single and epistatic quantitative trait loci (QTLs) that contributed to the differences of oil and carotenoid traits between maize and teosinte. Over half of teosinte alleles of single QTLs increased the values of the detected oil and carotenoid traits. Based on the pleiotropism or linkage information of the identified single QTLs, we constructed a trait–locus network to help clarify the genetic basis of correlations among oil and carotenoid traits. Furthermore, the selection features and evolutionary trajectories of the genes or loci underlying variations in oil and carotenoid traits revealed that these nutritional traits produced diverse selection events during maize domestication and improvement. To illustrate more, a mutator distance–relative transposable element (TE) in intron 1 of DXS2, which encoded a rate‐limiting enzyme in the methylerythritol phosphate pathway, was identified to increase carotenoid biosynthesis by enhancing DXS2 expression. This TE occurs in the grass teosinte, and has been found to have undergone selection during maize domestication and improvement, and is almost fixed in yellow maize. Our findings not only provide important insights into evolutionary changes in nutritional traits, but also highlight the feasibility of reintroducing back into commercial agricultural germplasm those nutritionally important genes hidden in wild relatives.     

中欧组织间合作研究项目MIX-UP助力实现“碳中和”

随着全球塑料循环体系的变革升级,提高塑料的回收利用不仅可以减少塑料在生命周期中的碳排放,还可以解决废塑料潜在的生态环境危害。文中介绍了2019年国家自然科学基金组织间国际 (地区) 合作研究项目“废塑料资源高效生物降解转化的关键科学问题与技术 (MIXed plastics biodegradation and UPcycling using microbial communities,MIX-UP)”。该项目聚焦“塑料污染”这一全球化的问题,围绕中欧双方确定的“塑料生物降解菌群”研究领域,联合中欧双方14家优势科研单位,开展实质性的重大前沿合作研究。针对废塑料生物降解中存在的解聚与重塑两个难题,项目以难降解石油基塑料 (PP、PE、PUR、PET和PS) 以及生物可降解塑料 (PLA和PHA) 的混合废塑料作为研究对象,从塑料微生物降解途径解析及关键元件的挖掘与改造、塑料高效降解混菌/多酶体系的构建与功能调控、塑料降解物的高值化炼制途径设计与利用策略3个方面展开研究。本项目将突破废塑料生物降解转化中高效降解元件挖掘、塑料降解物高值化利用的关键科学问题与技术,探索一条废塑料资源化、高值化、循环化、低碳化的新塑料循环路线,建立以“降塑再造”为核心理念的废塑料生物炼制体系,丰富我国固废资源化生物技术利用平台。项目的实施不仅有助于提升我国塑料 (生物) 循环经济的理论基础和关键技术水平,还可以推动我国与国际科研院所的多边交流与合作,促进我国在生物技术领域的创新发展,助力我国碳中和目标的实现。     

Sexual dimorphism of antennal and ovipositor sensilla of Tetrastichus sp. (Hymenoptera: Eulophidae)

Tetrastichus sp. (Hymenoptera: Eulophidae) is a primary parasitoid of the Metisa plana (Lepidoptera: Psychidae), an oil palm bagworm. The sensilla on the surface of the antenna and ovipositor of Tetrastichus sp. were examined using a scanning electron microscope. The antennae of both male and female Tetrastichus sp. are geniculate in shape and hinged at the scape-pedicel joint. The female antenna is about 200 µm longer than the male antenna. However, the male antenna has an additional flagellomere compared to the female antenna. In total, eight different types of antennal sensilla were observed on the antenna of Tetrastichus sp.: trichoid sensilla type 1, 2, 3, 4, placoid sensilla type 1 and 2, basiconic sensilla, and campaniform sensilla. The antenna of the female Tetrastichus sp. lacks placoid sensilla type 2 and campaniform sensilla. The distribution and abundance of the antennal sensilla were compared between the male and female Tetrastichus sp. and discussed. On the ovipositor stylet of Tetrastichus sp., coeloconic sensilla, styloconic sensilla and campaniform sensilla were observed. Trichoid sensilla were observed at the medial part of the distal extremity of the ovipositor.     

Extended Producer Responsibility in the United States

Extended producer responsibility (EPR) is a policy approach that requires manufacturers to finance the costs of recycling or safely disposing of products consumers no longer want. This article describes the evolution of EPR policies in the United States, focusing on the role of states as policy actors. For their part, federal lawmakers have not embraced EPR policies except to remove some barriers to state‐level initiatives. In the two‐decade period from 1991 to 2011, U.S. states enacted more than 70 EPR laws. In addition, manufacturers have implemented voluntary programs to collect and recycle products, but those efforts have proven largely ineffective in capturing significant quantities of waste products. With the help of new coalitions of diverse interest groups, recently states have renewed efforts to establish effective EPR programs, enacting 40 laws in the period 2008–2011. Several state initiatives suggest a more promising future for EPR.     

Implementing Extended Producer Responsibility Legislation

The goal of this article is to contribute to the understanding of how the multiple, and sometimes conflicting, stakeholder perspectives and prevailing conditions (economic, geographic, etc.) in the implementation locality shape extended producer responsibility (EPR) “on the ground.” We provide an in‐depth examination of the implementation dimension of EPR in a specific case study by examining concrete activities at the operational front of the collection and recycling system, and probing the varying stakeholder preferences that have driven a specific system to its status quo. To this end, we conduct a detailed case study of the Washington State EPR implementation for electronic waste. We provide an overview of various stakeholder perspectives and their implications for the attainment of EPR policy objectives in practice. These findings shed light on the intrinsic complexity of EPR implementation. We conclude with recommendations on how to achieve effective and efficient EPR implementation, including improving design incentives, incorporating reuse and refurbishing, expanding product scope, managing downstream material flows, and promoting operational efficiency via fair cost allocation design.     

Business‐to‐Business Information Technology User Practices at End of Life in the United Kingdom,Germany, and France

Business‐to‐business (B2B) electronics account for a significant volume of the electrical and electronic equipment (EEE) put on the market. Very little B2B waste electrical and electronic equipment (WEEE) is reported as collected in the European Union (EU) in compliance with the WEEE Directive, which uses the policy principle of extended producer responsibility (EPR) to ensure that WEEE is managed correctly. This presents a barrier to parties looking for access to the waste. Company practice dictates the channels into which B2B WEEE flows following primary use. This article presents a study that engaged with company actors directly to get a better understanding of business information technology (IT) EEE asset management. Data were collected to determine the barriers current practice could present to the collection of B2B IT EEE at end of life and the implications of these for the development of policies and strategies for EPR. A questionnaire was developed and data were gathered from organizations in three EU countries—the United Kingdom, Germany, and France—stratified by size. Some notable findings were that there are several routes by which end‐of‐life B2B WEEE can flow. The recycling and refurbishment of B2B IT units at end of use was shown to be commonplace, but it is likely that these units enter streams where they are not reported. The actors disposing of their units did not have information on the management or disposition of these streams. It is concluded that to achieve the goals of EPR for B2B IT WEEE, the networks and the operational practices of these streams need to be better understood when developing strategies and policies.     

Linking Material Flow Analysis with Environmental Impact Potential

Technology transition can have significant implications on the evolution of environmental impact potential of disposed electronics over time. Considering technology transition, we quantify the temporal behavior of ecological and human health impact potential from select heavy metals in electronic waste (e‐waste). The case study analyzes product substitution effects in two electronic cohorts from the U.S. market: (1) computers (laptops substituting for desktops) and (2) televisions (flat‐panel liquid crystal displays [LCDs] and plasma displays substituting for cathode‐ray tubes [CRTs]). Quantities of end‐of‐life (EoL) units to year 2030 are forecasted by the unique combination of dynamic material flow analysis, logistic trend analysis, and product lifespan calibration methods. Metal content from EoL units are assessed via a pathway and effect model using USETox? characterization factors to determine the toxicity potential attributed to heavy metal releases into different media (e.g., air, water, and soil) as an indicator of environmental burden. Results show high impact materials such as lead, nickel, and zinc cause changes in human health toxicity potential and copper causes changes in ecological toxicity potential. Effects of dematerialization, such as reduced metal content in laptops over desktops, provide some positive benefits in toxicity potential per product. However, from a market perspective, emerging e‐waste quantities created by increasing per capita penetration rates of electronics and increasing population will offset gains in environmental performance at the product level. The resulting analysis provides guidance on the timing expected for emerging EoL units and an indication of high impact potential materials requiring pollution prevention as product substitution occurs.